kirjoitti wrote:Hi and thank you Greenbean for a very fine and usefull program. I use it to log and monitor my breadmashine heatgun roaster. I use a Skil 8004 hg that has adjustable heat and airflow. I wonder is there any way to log the chances
I make like air 3 to 5 and heat 200 to 220 under the graph?
Hi kirjoitti, welcome to TMC
Thank you for your kind words regarding RoastLogger. The answer to your question depends on the input device you are using to interface your thermocouples to RoastLogger.
The RoastLogger Controller automatically logs and charts changes to heater and fan settings during a roast. This is intended for users who are using the Controller to control their heater and fan (via suitable hardware) but it can be used manually by anyone using the Controller for input. That is if you manually change the heater or airflow setting on your heat gun you can move the heater or fan slider to the relevant setting and the change will be logged and charted.
The Controller can communicate with an Arduino, Arduino+TC4 or TC4C provided they are loaded with a compatible sketch and will then provide the above functionality.
If you are using other devices for temperature input such as digital multimeters then these are not interfaced to RoastLogger via the Controller so the above functionality is not available.